Did you know that water pressure is becoming a problem for people? We’ve reached a time when low water pressure is edging toward crisis levels in many locations.
From businesses that need high water pressure for their industrial equipment to private homeowners wanting a clean shave and hot shower, everyone wants to know how to improve water pressure.
How can you help make sure your water pressure never bottlenecks again? Take a look at our guide to find out.
1. Adjust Water Pressure Regulator Valve
One thing you can do is adjust the water pressure regulator valve. This valve is typically located near where the main water line enters your home. Once you find it, you can use a wrench to turn it clockwise or counterclockwise, depending on which way you want to adjust the pressure.
If you turn it clockwise, it will increase the pressure, and if you turn it counterclockwise, it will decrease the pressure. If you’re not sure which direction to turn the valve, contact your local water utility company for help. When you’re done adjusting the valve, turn on a faucet in your home and see if the pressure has changed.
Be careful not to turn it too high, as this can cause damage to your home’s plumbing. If you’re not sure how to adjust the valve, ask a plumber for help.
2. Fix Cracked or Damaged Pipes
If you have a damaged pipe, it can affect your water pressure. If the damage is to the main water line, it can cause a decrease in water pressure for your entire home. A leak in a pipe can also cause water pressure to drop.
One way you can do this is to check for cracked or damaged pipes, it’s important to fix them as soon as possible. Depending on the severity of the damage, you may be able to fix it yourself or you may need to call a plumber.
If you find a minor damage, you can stop the leak simply by patching the pipe with a repair kit. But if the damage is more severe, you’ll need to replace the entire section of the pipe. If you have any, they will need to be repaired or replaced.
3. Install a Water Pressure Boosting Pump
Water pressure boosting pumps are a great way to improve your water pressure. These pumps are designed to increase the water pressure in your home by circulating the water in your system and delivering it to your fixtures at a higher pressure.
This can be a simple and effective way to improve your water pressure, and it is a good option if you are on a budget. They are easy to install and can be done in a few hours.
When installing, make sure that you have the proper tools and materials. Follow the instructions carefully. Take your time and be careful. If you have any questions, ask a professional. And test the system before you use it.
If you are not sure how the pumps work and all else fails, making things worst, then it’s time to call for the help of an emergency pump service.
4. Clean Out Mineral Buildup in Pipes
One simple and effective way to improve your water pressure is to clean out mineral buildup in pipes. Over time, minerals can build up in your pipes and cause reduced water pressure. By periodically cleaning your pipes, you can help remove these unwanted minerals and restore normal water pressure.
There are a few different ways to clean out mineral buildup in pipes. One method is to use a plumbing snake or pipe auger. This device can help loosen and remove any mineral deposits that may be blocking your pipes.
Another option is to use a chemical pipe cleaner. These cleaners are designed to break down mineral buildup and restore normal water flow. If you are experiencing reduced water pressure, cleaning out your pipes may help.
5. Check and Adjust the Flow Rate
The water pressure in a home is determined by the municipality in which the home is located. The water company or municipality supplying the water to the home provides the water flow rate for water pressure.
This is the rate at which water flows from the main water line into the home. The water flow rate is determined by the size of the water main, the number of homes served by the main, and the elevation of the home. A lower flow rate means that there is less water available to be pushed through your pipes.
To check, turn on all the faucets in your home and time how long it takes for the water to reach its full flow. Then, divide that time by the number of faucets you have running. Once you know your flow rate, you can compare it to the flow rates of other homes.
If your flow rate is lower than average, it’s time that you see your water service provider and makes the flow rate adjustments you are expecting.
Learn How to Troubleshoot and Improve Your Water Pressure
Water pressure is important because it helps to push water through pipes and into homes and businesses. Without proper water pressure, water would not be able to flow correctly and could cause problems for people.
If you’re noticing a drop in water pressure, there are a few things you can do to troubleshoot and improve it. Check for leaks in your pipes, fixtures, and hoses. Make sure your water shut-off valves are fully open.
And clean or replace your home’s water filter. If you follow these steps and still can’t improve your water pressure, contact a licensed plumber.
If you found this post to be helpful, our blog has more.
